Coatings

ZnSe 3.5-4.8 m

  • Anti-reflective coating on zinc selenide (ZnSe) for the range of 3.5-4.8 microns. Anti-reflection in other ranges specified by the customer is possible.
  • The adhesion of the coating is checked with adhesive tape.
  • The coating has passed the climatic test (24 hours at a temperature of +50 degrees Celsius and a humidity of 98-99%) and mechanical durability (according to the instructions from paragraph 4.5.11 of MIL-C-675C).
  • The transmission of a window with coating on both surfaces is shown.

ZnSe 3.5-15 m

  • Anti-reflective coating on zinc selenide (ZnSe) for the range of 3.5-15 microns. Anti-reflection in other ranges specified by the customer is possible.
  • The adhesion of the coating is checked with adhesive tape.
  • The coating has passed the climatic test (24 hours at a temperature of +50 degrees Celsius and a humidity of 98-99%). The coating can withstand wiping with a cotton swab dipped in acetone.
  • The transmission of a window with coating on both surfaces is shown.

ZnSe 10.6 m

  • Anti-reflective coating on zinc selenide (ZnSe) at 10.6 μm. Anti-reflection in other points or ranges specified by the customer is possible.
  • The adhesion of the coating is checked with adhesive tape.
  • The coating has passed the climatic test (24 hours at a temperature of +50 degrees Celsius and a humidity of 98-99%).
  • The coating can withstand wiping with a cotton swab dipped in acetone.
  • The transmission of a window with coating on both surfaces is shown.

See also:

Zinc selenide