The function of mirror optical coatings -formation of systems with maximum reflectance. Mirror coatings are divided into metal, metal-dielectric and dielectric.


Aluminum mirror with protection

  • Aluminum mirror with protection on K8 glass.
  • The position of the reflection peaks can be changed.
  • Adhesion tested with adhesive tape.
  • The coating withstands rubbing with a cotton swab moistened in acetone.
  • Reflection measured at an incidence angle of 9 degrees.

Metal-dielectric mirror

  • Metal-dielectric mirror with protection on K8 glass in the range 0.4-0.7 Ám.
  • The position of the reflection peaks can be changed.
  • Adhesion tested with adhesive tape.
  • The coating withstands rubbing with a cotton swab moistened in acetone.
  • Reflection measured at an incidence angle of 9 degrees.

Dielectric mirror

  • Dielectric mirror on K8 glass for 0.808 Ám.
  • The position of the reflection peaks can be changed.
  • Adhesion tested with adhesive tape.
  • The coating has passed climatic tests (24 hours at temperature of 50 degrees Celsius and humidity of 98-99%) and mechanical durability tests (according to the instructions of the paragraph 4.5.11 MIL-C-675C).
  • Reflection measured at an incidence angle of 9 degrees.